The US HVAC market is about $159.4 billion in 2026 if you count residential and light commercial installation, service and maintenance. Other reports say $18.98 billion or $62.5 billion, because they measure different slices. For a contractor, none of these is the number that matters. What matters is the slice inside your drive-time radius and how much of it you actually capture.
This guide gives you the national figures and what each one includes. It also shows how recent shipments are trending and walks you through a simple method for sizing your own territory. Then it covers the same question for landscaping, plumbing, dental and logistics. If you run a field-service business, you will see where the money leaks between the market on paper and the revenue in your account.
TL;DR
- Contracting revenue: residential and light commercial HVAC work generated $159.4 billion in 2026, with a total addressable contracting economy of $183.2 billion in 2025.
- Why numbers differ: equipment, services and contracting are different markets. The $62.5 billion, $18.98 billion and $159.4 billion figures are not rivals, they are different scopes.
- Direction: shipments are recovering. Year-to-date air conditioner and heat pump shipments through September 2026 were up 7.9%, but still below 2024 levels.
- Your market: size it bottom-up. Households in your territory, times the share with equipment, times annual spend per household.
- Other trades: landscaping is about $196 billion, dental services about $185 billion, and logistics costs about $2.6 trillion, each on its own definition.
Table of Contents
- The national figure: what $159 billion actually covers
- What the service side looks like
- Is the market growing or shrinking?
- How to size your own HVAC market in five steps
- Where the gap between market and revenue hides
- Landscaping, plumbing, dental and logistics: the same question
- How Signal Engine fits
- Our view: the market is not your problem
- FAQ
- Sources
- Ready to Stop the Revenue Leak?
The national figure: what $159 billion actually covers
Start with a plain rule: a market size is only as good as its definition. "HVAC" can mean the boxes made in factories, the labor to install them, or the contracts to keep them running. Published estimates pick one or mix them.
Here is how the main figures line up.
| What is measured | Figure | Period | Source |
|---|---|---|---|
| Residential and light commercial installation, service and maintenance (contracting revenue) | $159.4 billion | 2026 | HVACWatcher |
| Total addressable contracting economy, including indoor air quality, duct remediation and controls retrofits | $183.2 billion | 2025 | HVACWatcher |
| HVAC services market | $18.98 billion | 2026 | Mordor Intelligence |
| HVAC systems (equipment) market | $31.7 billion | 2025 | Grand View Research |
| Heating and air-conditioning equipment manufacturing (NAICS 33341) | $62.5 billion | 2026 | IBISWorld |
| HVAC industry revenue (BBB projection) | $123.2 billion | 2023 | BBB |
The spread is huge, and it is mostly scope. The manufacturing number counts what factories sell. The contracting number counts what homeowners and building owners pay for installed systems and service. The "services market" figure uses a narrower definition of service work than the contracting figure does.
If you sell or maintain systems, the contracting figures are the closest to your world. The same HVACWatcher report puts 2019 to 2025 growth at 4.6% a year and projects $204.6 billion by 2031.
Older headlines you may see in search results, such as 2021 or 2019 base years, are forecasts built on earlier data. Always check the base year before you quote one.

How many contractors share it
The market is crowded and local. The HARDI report summarized by Homepros counts roughly 143,000 HVACR and 161,000 plumbing contracting businesses in the US, with combined 2025 revenues above $327 billion. That is a lot of trucks chasing the same homeowners.
What the service side looks like
For a contractor, the shape of the revenue matters as much as the size. Mordor Intelligence's 2025 breakdown of HVAC services shows where the dollars sit:
- Residential: 52% of services revenue, with industrial forecast to grow fastest at 7.9% a year through 2031.
- Recurring service agreements: 55% of revenue.
- Preventive maintenance contracts: 39% of revenue.
- Cooling and AC services: 41% of revenue.
- Regional lead: the South, with 38% share and 7.2% growth a year.
The takeaway is simple. More than half of service revenue comes from agreements, not one-off calls. A shop that treats every job as a one-time sale leaves the largest part of the market on the table. That is a retention problem, and retention problems show up in your data long before they show up in your bank balance.
Is the market growing or shrinking?
Growing, with a bumpy path. The best near-term read is shipments, because every system that ships eventually needs installing.
AHRI data reported by ACHR News show 673,286 combined air conditioner and heat pump units shipped in September 2026, up 27.3% from a year earlier. Year-to-date shipments reached 7.06 million, up 7.9%. September 2024 was higher at 903,856 units, so the market has recovered but not fully returned to that peak.
A few more signals from 2026:
- Carrier's CEO said the US residential market is tracking at about 7.5 million units in 2026, above earlier expectations of 6.5 to 7 million and below 9.2 million in 2024. He also said the 2025 shift toward repair over replacement has largely subsided.
- Replacement drives the volume: roughly 75 to 80% of shipments are replacements, according to industry estimates reported by Homepros.
- HARDI projects 2026 real residential sales growth of about 2%, within a range of minus 1% to plus 5%. Its Tim Fisher described that as a volume projection that excludes price increases.
- A mid-market M&A firm's Q3 2026 report says 2025's weakness came from distributor destocking after the A2L refrigerant transition, and that orders now track end-market activity again.
Note what these figures do and do not say. They describe shipments and sales in 2026. They move monthly, so treat them as a snapshot and check the latest AHRI release before you quote one.
For small shops, the practical message is steady demand with a large replacement base. The unit count does not decide who wins a given ZIP code. Speed of response and follow-up do.
How to size your own HVAC market in five steps
A national number tells you the industry is healthy. It does not tell you whether to add a second truck. A local estimate does. The classic formula from an extension-service guide at NC State is market potential equals number of people, times market share, times average price, times annual consumption, with the market area defined by geography or drive time. Here is the HVAC version.
1. Draw your territory by drive time
Use the area your crews can reach profitably, not a county line. A 30-minute radius from your shop is a common starting shape. Write down the ZIP codes or census tracts inside it.
2. Count the households
The Census Bureau's American Community Survey publishes household counts, owner-occupied housing and median income for small areas. For small areas use the five-year estimates, which are steadier than one-year ones. An HVAC owner profiled by ACHR News found his service area of about 1.7 million people held roughly 420,000 condos and homes, and income data let him split it further.
3. Apply the equipment and service rates
Not every household buys in a year. Estimate the share with central systems in your region, then the share that replaces, repairs or signs a maintenance agreement. HARDI sells a demand-per-location tool that uses Energy Information Administration and ACS estimates to size the installed equipment base around a business location. Climate matters, so a Phoenix territory and a Minneapolis territory will not share the same rates.
4. Multiply by average ticket
Use your own invoices. Your average repair ticket, average install and maintenance agreement price beat any national average, because they reflect your pricing and your customers.
5. Adjust for reality
Subtract customers you will never reach: renters in buildings with landlord-managed service, homes under warranty and areas you do not serve. Then compare the result to your revenue to get your share.
A worked example (hypothetical numbers)
Suppose your territory has 60,000 households. Say 70% own their homes, and 90% of those have central air or a heat pump. Assume 6% of those homes buy a repair or replacement in a given year at an average of $1,400, and 30% could be sold a $250 maintenance agreement.
- Owner-occupied homes with systems: 60,000 × 0.70 × 0.90 = 37,800
- Repair and replacement spend: 37,800 × 0.06 × $1,400 = about $3.2 million
- Maintenance agreements: 37,800 × 0.30 × $250 = about $2.8 million
- Territory potential: about $6 million a year
If your shop does $900,000, you hold roughly 15% of that slice. If you do $200,000, you have a visibility problem or a follow-up problem, not a shortage of homes. These inputs are illustrations, so swap in your own.
One warning from a local-market sizing framework: a wrong input in any one of the three core numbers can throw a local estimate off by 2x in either direction. Check each against your own books.

Where the gap between market and revenue hides
A big territory and a small bank balance usually come from the same four leaks:
- Missed calls. A homeowner with a dead AC calls the next contractor if you do not pick up. Our guide to recovering HVAC missed calls in 30 days shows how to track what comes back.
- Slow lead follow-up. Quotes that go quiet after one email are lost revenue. See the HVAC lead nurturing playbook.
- Lapsed maintenance customers. With recurring agreements holding 55% of services revenue, every unrenewed customer is a measurable loss.
- Shoulder-season dips. Spring and fall slow down. Here is how contractors turn the shoulder season into revenue.
Visibility matters too. A published HVAC SEO case study shows how a Los Angeles contractor grew monthly clicks from 153 to 646, which is a useful reminder that demand reaches the shops it can find. Commercial work widens the territory further: facility owners often bundle service, insulation services and other maintenance under one contract, which is the commercial side of the recurring-revenue pattern above.
Track the right numbers and you can see all four leaks. The eight HVAC KPIs that stop revenue leaks and the sales benchmarks for managers are a good place to start.
Landscaping, plumbing, dental and logistics: the same question
The method above works for any local service business. The national totals differ, and so do their definitions.
Landscaping
Mordor Intelligence puts the US landscaping market at $196.16 billion in 2026, up from $186 billion in 2025, and forecasts $255.74 billion by 2031. It counts design, installation, maintenance and enhancement of outdoor spaces across residential, commercial, municipal and institutional properties. Its analysts note the market stays fragmented enough for new local entrants. Seasonal swings make the recurring-contract share the number to watch.
Plumbing
Plumbing is usually reported together with heating and air conditioning. HARDI counts about 161,000 plumbing contracting businesses alongside the HVACR contractors, with combined 2025 revenues above $327 billion. Because the Census category covers plumbing, heating and air conditioning together, a plumbing-only total is harder to isolate. Size your own territory with the same household method, using plumbing ticket averages.
Dental
Precedence Research values US dental services at $185.39 billion in 2026, growing at a 4.86% annual rate to 2035. For a practice, the local version starts with the patients in your drive-time radius and how often they visit. No-shows and lapsed recall patients are the leak.
Logistics
The CSCMP State of Logistics report, produced with Kearney, put US business logistics costs at $2.6 trillion in 2025, or 8.7% of GDP. That is the cost of moving and storing goods, not the revenue pool for a small carrier. An owner-operator's real market is the lanes and shippers within reach.
How Signal Engine fits
Sizing a market is a one-time exercise. Capturing it is daily work: who is ready to buy, who is about to lapse, which calls went unanswered. Signal Engine is an AI revenue intelligence platform for small service businesses. It scores every customer on buy-readiness, flags who is about to churn, and drafts the next action. Everything waits for your one-click approval before it reaches a customer. It comes with ready-made modes for HVAC, plumbing, dental, landscaping, logistics and more, and an onboarding AI builds a custom mode for a business that does not fit.

There are no per-seat fees, and every feature is included in every plan. The Free plan is a way in, Growth is $149 per month and Scale is $297 per month. See the plans and pricing, or look at the revenue intelligence page for HVAC businesses. Plumbers can start with the plumbing page.
Our view: the market is not your problem
Every year a new report says HVAC is a $150 billion-plus industry, and every year small contractors read it and feel nothing. We get why. A national total does not put a truck on the road.
Look at the structure instead. With more than half of services revenue coming from recurring agreements, the market rewards the shops that remember their customers. The contractor who calls a lapsed maintenance customer before the season starts beats the one who bought a bigger ad.
That is why we built Signal Engine around signals, not dashboards. Score the customers who are ready to buy. Catch the ones drifting away. Recover the calls you missed. Then approve the next message with one click, so nothing goes out without you.
Size your territory once, then watch your share every month. Your share is the number you can change.
Bernard
FAQ
What is the size of the US HVAC market?
It depends on scope. Residential and light commercial contracting revenue is about $159.4 billion in 2026. Equipment manufacturing is a separate $62.5 billion industry in 2026. Pick the figure that matches what you sell and quote its definition.
Is the HVAC market growing?
Yes, modestly. Year-to-date air conditioner and heat pump shipments through September 2026 were up 7.9%, though still below 2024. Contracting revenue is projected to grow about 5.1% a year to 2031.
How do I find the HVAC market size in my area?
Define your drive-time territory, count households and owner-occupied homes from Census data, and apply equipment and service rates. Then multiply by your own average ticket. The five steps above walk through it with a worked example.
Why do market reports disagree so much?
They measure different things: factory shipments, installed systems, service-only revenue or total contracting work. Base years and forecast dates also differ. Always check what a figure includes and which year it covers before comparing.
Can the same method size a plumbing, dental or landscaping market?
Yes. Replace the equipment rate with the right local demand unit: homes with plumbing needs, patients in your radius or properties with lawns. Then use your own average ticket and annual visit frequency.
Sources
- 2026 HVAC Industry Report, HVACWatcher
- US HVAC Services Market, Mordor Intelligence
- US HVAC Systems Market, Grand View Research
- Heating and Air-Conditioning Equipment Manufacturing, IBISWorld
- The Future of HVAC Contractors in the United States, BBB
- HARDI report sizes up HVAC, plumbing markets, Homepros
- Cooling equipment shipments, ACHR News
- Residential HVAC outlook, ACHR News
- HVAC shipments extend growth streak in September, Homepros
- HVAC Sector Q3 2026 report, Carter Morse
- Estimating Market Potential, NC State
- HVAC Demand per Location, HARDI
- Local Census Data for Your HVAC Business, ACHR News
- How to Size Local Services Markets, PinpointIQ
- US Landscaping Market, Mordor Intelligence
- US Dental Services Market, Precedence Research
- State of Logistics Report, CSCMP
- HVAC SEO case study
- Commercial insulation services
Ready to Stop the Revenue Leak?
Signal Engine gives small and local businesses 31 AI-powered tools to score leads by buying intent, predict churn before it happens, auto-generate email and SMS campaigns, and recover missed calls automatically — all in one dashboard starting at $49/month. Start your free 7-day trial — no credit card required. Setup takes 5 minutes.
